Two Cylinder Steelworker
Exclusive and UNIQUE from Geka, the GEKA Bendicrop 85S is a twin cylinder 85 tonne steelworker with 6 workstations. This hydraulic ironworker machine is fitted with a bending station and a system to avoid distortions when cutting plates.
Thanks to the blade holder's vertical movement, the machine has an excellent performance in all its SIX work stations:
Punching
Vee Notching
Shear for flat bars
Angle cutting
Cutting of round and square bars
+ Bending as standard
Fitted with an anti torque system to reduce deformation when shearing flat bars.
The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 50mm and 90mm width.
Permanently fitted bending station complying with CE standards.
Goose neck die-holder for punching of angle and channel sections on flanges and web.
Quick tool change
Angle shearing without loss of material.
Flat bar and plate shearing system with minimum deformation & mitre shearing up to 45º.
Triangular notching with table.
| Manufacturer | GEKA |
| Machine Type | Steel Worker |
| Steel Flatbarshear | 450 x 15mm, 450 x 18mm (5°) |
| Punching | 40 through 15mm, 30 through 20mm |
| Steel Triangular Notching | 120 x 12mm |
| Steel Angle Shear 90 | 120 x 120 x 10mm |
| Steel Bending | 200 x 12mm |
| Steel Solid Bar | 45mm round, 40mm square |
| Punching Power | 850 kN |
| Tonnage | 85 tonnes |
| Throat Capacity | 300mm |
| Table Height | 1094mm |
| Motor | 9kW |
| Weight | 2170Kgs net |
