We are currently experiencing a technical difficulty with responding to email. In the meantime, please call us on 01536 410999.
search using our
SAW FINDER
Call Prosaw 01536 410999

Product Details

SHARE:

Waytrain LX250AE

Heavy Duty Automatic Bandsaw for solid bar, bundles & general sawing

  • Vice feed automatic with encoder for precision length set
  • Twin hydraulic vices clamp both sides of material
  • Simple input of component length and number of pieces via touch screen
  • Steplessly variable blade speed 17 ~ 67m/mm
  • Hydraulic blade tension control for optimum blade life.
  • Variable downfeed control.

Downloads: PDF Information Sheet for Waytrain LX250AE Information Sheet

Please note: All the information about machines listed on this website is subject to change and should not be relied upon without verification from our sales staff.

Waytrain LX250AE from Prosaw

Photos

Select a photo to enlarge.

Waytrain LX250AE Waytrain LX250AE Waytrain LX250AE Waytrain LX250AE Waytrain LX250AE Waytrain LX250AE Waytrain LX250AE

Waytrain LX250AE Details

1.PRECISE CUT OFF LENGTH SETTING:

The touch sensitive control screen located at the operator's station provides easy selection of precise bar length requirement. The readout is calibrated in 0.10mm or 0.01ins increments 

2.AUTO HEAD-ELEVATION AND QUICK APPROACH:

Raising the blade higher than necessary to clear the work for the next cut wastes time. Head elevation is controlled automatically and no longer requires the operator's attention. A control device that senses the size of the work-piece, permits the saw head 
to raise just high enough so the blade clears
the work. This reduces index cycling time significantly.

3.INFINITELY VARIABLE BLADE SPEED:

The Blade speed is set and adjusted by acting on the touch sensitive control screen. Simply select the speed you require, it is set automatically via the frequency inverter.

4.NC CONTROL: 

It’s easy to program multiple lengths and quantities on the user friendly touch screen, if lengths above 400mm (16ins) are required, just enter the length you need, and the machine will calculate the number of feeds 
required.

5.QUICK-ADJUSTING CARBIDE SAW-BAND GUIDES: 

For the replacement of the saw blade or the repositioning of the guide arms. Two thumb screws are incorporated in the saw guides to allow these operations to be carried out quickly and efficiently. 

6.IDLE WHEEL MOTION DETECTOR: 

This device not only can protect the saw blade from damage if the blade overloads during cutting, but will also shut off the machine if the blade should break.

7.HYDRAULIC BAND TENSION CONTROL:  

When a blade is fitted the correct tension is applied hydraulically and during operation of the saw the correct tension is automatically maintained. The tension is reduced when the saw is shut-off. This procedure greatly increases blade life.

8.QUICK-ACTION HYDRAULIC TWIN-VICE (SPLIT VICE) 3-JAW CLAMPING: 

Materials are firmly clamped on both sides of the saw blade by twin vices. Operating a single switch provides manual or automatic clamping and unclamping materials. These unique twin vices allow automatic bar feed and cutting to within as little as 50mm of bar end and also reduces burrs on the cut component

9.UNIQUE TWO-WAY VICE JAW: 

Both vice jaws on the rear carriage are open and closed simultaneously, unlike the traditional method which only opens one vice. This feature is designed to handle stock material that may not be completely straight.

10.AUTOMATIC CHIP CONVEYOR: 

A power driven brush keeps the saw blade free of chips while a rotating screw propels the swarf up a chute and out of the machine

OPTIONS:

  • Delivery to your works (unloading not included)        
  • Conveyors & magazine feed systems        
  • Commissioning and operator instruction (see terms)    
  • Vice pressure reduction                
  • Hydraulic top clamps                    
  • Blades & Service contracts

Waytrain LX250AE Specifications

Machine Type Bandsaws
Operation Automatic, Horizontal, Pivot Action,
Cutting Type Bundle Cutting,
Materials Solids, Sections, Aluminium, Nickel Alloys, Ferrous, Non-Ferrous,
Sections (mm)
 
Circular
Horizontal
Vertical
Square
90
250mm
250 x 300
45 L
45 R
60 R
Bundle Cutting
Solids (mm)
Circular
Rectangle
Square
250
250 x 300
250
Other Details
Blade Size 3505 x 34 x 1.1
Blade Speed 17-67m/min
Weight 1430Kg
Dimensions 2215 x 1400 x 2040
Motor 3Hp x 4P
Hydraulic System Motor: 1Hp x 4P Tank: 30Ltr
Coolant System Motor: 1/6Hp x 4p Tank: 40Ltr
 
 
 

Call us during office hours (8:30am – 5pm, Mon – Fri) for assistance with choosing the best machine for the job.

Request Information

Fill in the form below, and we'll get back to you as soon as possible.