search using our
SAW FINDER
Call Prosaw 01536 410999

Product Details

SHARE:

Danobat CP16.16

Extra heavy duty semi-automatic bandsaw designed for fast accurate cutting of stainless steel and super alloys with carbide blades

Heavy duty twin column construction with single piece saw bow and both columns filled with polymer concrete. Paso Paso "satellite" navigation for bandsaws. Automatically runs in a new blade.

Downloads: PDF Information Sheet for Danobat CP16.16 Information Sheet

Please note: All the information about machines listed on this website is subject to change and should not be relied upon without verification from our sales staff.

Danobat CP16.16 from Prosaw

Photos

Select a photo to enlarge.

Danobat CP16.16 Danobat CP16.16 Danobat CP16.16 Danobat CP16.16 Danobat CP16.16 Danobat CP16.16 Danobat CP16.16

Danobat CP16.16 Details

Maximum production rates and optimum blade life with minimum operator input.

Intelligent blade deflection monitor slows the feed and speed to to maintain a square cut

Included is a high performance gearbox specially sized for large loads at low revolutions. The powerful saw drive motor and gear box provide the best torque and power for a wide range of materials.

The band saw range has sufficient flexibility to allow higher or lower blade speeds depending on the material to cut.

Both guiding arms are independent from the mobile clamps and are driven by hydraulic cylinders; the arms are provided with sensors to detect the position in order to be as close as possible to the cutting line, so that the guiding arm is automatically adjusted to the piece width. During the cutting process, the mobile arms are blocked by hydraulic pistons in order to ensure the cutting quality.

Material fastening is done at either side of the blade, avoiding burrs, as material remains totally fastened until the cutting operation is completed. Any manual adjusting of the material width is not required: the stroke is fully automatic.

Both vices are independent facilitating loading and adjusting of heavy pieces. It is not necessary to align the piece against any reference. Because both vices and arms can be moved, these can be adjusted to the piece, thus saving on positioning the workpiece.

More Information

  • Automatic swarf conveyor
  • Automatic tensioning
  • Downfeed speed control
  • Laser fast approach
  • Independent saw vice
  • Hydraulic arm blockage
  • Independent guiding arms

Optional equipment:

  • Cutting deflection control
  • Intelligent cutting software
  • Cutting depth control

Danobat CP16.16 Specifications

Machine Type Bandsaws Large Capacity,
Operation Manual, Semi-Automatic, Horizontal, Twin Column,
Materials Solids, Aluminium, Nickel Alloys, Ferrous, Non-Ferrous,
Solids (mm)
Circular
Rectangle
Square
1600
1600 x 1600
1600
Other Details
Blade Size 15190 x 80 x 1.6
 
 
 

Call us during office hours (8:30am – 5pm, Mon – Fri) for assistance with choosing the best machine for the job.

Request Information

Fill in the form below, and we'll get back to you as soon as possible.