<-- Twitter Summary card images must be at least 120x120px -->
Prosaw Limited - the people to see for saws
Call Prosaw 01536 410999

Bomar Ergonomic 290.250ANC

A bandsaw machine from Bomar

Ergonomic 290.250ANC

Bomar
Bandsaws
Pivot action
Hydraulic downfeed control with automatic cutting control
Max Capacity: 290mm

The Bomar Ergonomic 290.250ANC is an automatic bandsaw designed for cutting section material and small solid material. This robust machine features NC controls, a hydraulic downfeed control with automatic cutting control and a feeding length of 600mm.


A powerful automatic bandsaw designed for angular cuts, suitable for the workshop, with a heavy saw frame of vibration-proof cast alloy, with a powerful industrial engine and a spiral gearing running in an oil bath.

Precise hard metal saw band guides, saw head pivot embedded in pre- stressed conical bearings, a 27mm saw band and a synchronic swarf brush are the prerequisites for excellent cutting performance. The machine is equipped with an automatic cutting pressure regulation system. The feeding length is 600 mm in one step and it is measured by a linear measuring system with high resolution (precise piece lengths). The floating vice is guided by two hardened guides bars with linear ball-recirculation bearings. The consistent roller conveyor provides for simple material feeding and it is a safe basis also for short pieces. Material clamping is safe due to the split main vice (short remaining piece length) and hardened, grooved clamping edges. The performance of the hydraulic drive is so high that short auxiliary times can be achieved with the double pump and the proportional valve control. An advanced CNC control with simple dialogue-guided operation and a four- lines illuminated text display enable saving of several combinations of lengths and numbers as well as repeated feeds up to 6000 mm. The machine is prepared for the use of a swarf remover and a broad range of accessories as roller conveyors and stops, minimum-amount lubrication system, LaserLiner, bundle-clamping device, smooth speed regulation are available.

Bomar Ergonomic 290.250ANC Standard Details

  • Robust, one piece cast iron bow
  • NC controls – 99 lines for programming, fault diagnostics
  • 600mm single pass feed length, multiple feed for longer lengths
  • Hydraulic downfeed control with automatic cutting control

Bomar Ergonomic 290.250ANC Specifications

Manufacturer Bomar
Machine Type Bandsaws
Operation Type Automatic, Pivot action, Straight Cutting
Max Capacity Cut Size 290
Material Type Sections
Materials Non ferrous, Ferrous, PVC
Blade Size 2480 x 0.9 x 27
Dimensions 1300 x 1800 x 1600

Contact Us

Call us during office hours (8:30am – 5pm, Mon – Fri) for assistance with choosing the best machine for the job.

Please note: All the information about machines listed on this website is subject to change and should not be relied upon without verification from our sales staff.

Make An Enquiry

Complete the form below with your enquiry.