Modern technology, simple controls and small space requirements make the saw machine ideal for production operation. Continuous bevelling and the ability to saw up to 6,500 mm using multiple stroke lengths give these compact machines universal application.
Powered shavings brush always runs synchronized to the saw band speed.
On both columns, the saw frame is mounted to high-precision, play-free linear guides. These guides guarantee maximally smooth operation and cutting precision.
For bevel cuts, the supporttable swivels with the saw band. This ensures that the supporttable is never cut.
The bevel clamp is right on the front of the pivoting console, thus allowing a simple, uncomplicated workflow.
Bomar Individual 520.360 GANC Standard Details
- Freely positionable control panel
- Continuous band speed from 20 to 120 m/min using a frequency converter
- Feed lengths up to 750 mm with a maximum material weight of 2,500 kg
- Fed on precise, pre-stressed linear guides
- Feed movement provided by a hydraulic cylinder regulated by a proportional valve
- Clamping jaws guided by hardened, ground circular guides with ball bushings
- Extensive expansion possibilities with available options and accessories
Bomar Individual 520.360 GANC Technical Details
The vice is guided on hardened, ground rails. The special design allows the slide rails to be readjusted at any time and the vice to be held play-free.
Large guide shoes made of vibration-damping cast material in combination with carbide slideways and low-wear guide rollers make for precise cuts.
Simple. Clear. Easy to use
The control panel on Individual semi-automatic devices is laid out simply and clearly. The lighted display gives status and error messages in plain text.
Saw band tensioner
Standard equipment includes a hydraulic band tension display, an electronic monitor for saw blade tension and saw band breakage, and more.
A non-stop roll conveyer up to the main clamping device allows full support for the materials and little wear.
Generously sized full-lift cylinders allow vice operation right from the control panel.
Cutting feed and cutting pressure are set individually at the control panel. The selected cutting pressure is displayed on a manometer.
ADFR – The highest precision. Faster cut.
The ADFR system regulates the interplay of the cutting pressure and the cutting feed automatically in real time. A sensor gives the current load on the saw band and regulates the cutting feed according to the shape of the material. For larger cross cuts to the material, the cutting channel lengthens and the saw band's load increases. If the cutting feed in these ranges is not automatically adjusted, the saw band's life drastically decreases or the cutting time significantly drops due to a lower feed.
Bomar Individual 520.360 GANC Specifications
||Bandsaws / Automatic Horizontal Bandsaw
Automatic, Mitre Cutting