Danobat Danobat CP 20.20 Technical Details
Included is a high performance gearbox specially sized for large loads at low revolutions. The powerful saw drive motor and gear box provide the best torque and power for a wide range of materials.
The band saw range has sufficient flexibility to allow higher or lower blade speed depending on the material to cut.
Both guiding arms move independently from the mobile clamps and are driven by hydraulic cylinders; the arms are provided with sensors to detect the position in order to be as close as possible to the cutting line, so the guiding arm is automatically adjusted to the piece width. During the cutting process, the mobile arms are locked by hydraulic pistons in order to ensure the cutting quality.
Material fastening is done at either side of the blade, avoiding burrs, as material remains totally fastened until the cutting operation is completed. Any manual adjusting of the material width is not required: the stroke is fully automatic.
Both vices are independent, facilitating loading and adjusting of heavy pieces. It is not necessary to align the piece against any reference. Because both vices and arms can be moved, these can be adjusted to the piece, thus saving on positioning the workpiece.
- Automatic swarf conveyor
- Automatic tensioning
- Downfeed speed control
- Laser fast approach
- Independent saw vices
- Hydraulic arm blockage
- Independent guiding arms
- Cutting deflection control
- Intelligent cutting software
- Height cutting control
- Online programming
Danobat Danobat CP 20.20 Specifications
Semi-Automatic, Large Capacity, Square Cutting,
|Max Capacity Cut Size
||16140 x 80 x 1.6