search using our
SAW FINDER
Call Prosaw 01536 410999

Semi-Automatic Circular Saws

SHARE:

Semi-Automatic Circular Saws

Semi automatic circular saws are available as pivot action, vertical, upstroking, plate saws or double headed machines. Prosaw have a saw to meet your application requirements and budget.

A semiauto coldsaw usually has a single button start that initiates the cycle. The blade starts, the powered vice clamps the workpiece and the cutting head feeds the blade through the material at a controlled rate. Powered bow raise lifts the head after the piece has been cut.

All types of ferrous and non ferrous materials can be cut with circular saws, and when the correct type of saw and blade is used it usually gives a better surface finish than a bandsaw.

Machines with fast blade speeds, fitted with tungsten carbide tipped, TCT, blades are designed to cut aluminium , plastic and other non ferrous solids, profiles and sections. An abrasive saw can be used to cut solid hard metals and a cold saw with slower blade rotational speeds, using a super high speed steel, SHSS, blade is used to cut mild steel, stainless steels and other metals in all types of solid and section.

Some machines incorporate a swivelling head for easy mitre cut setup.

The rigid design of a vertical circular saw may be the best option for cutting some solid steels. Twin head saws cut long components to length in a single cycle with opposing mitres at the ends if required.

Quality manufacturers that have been selected for the supply of this machinery include Bomar, Ileri, Roty and Pertici.

Machines available in the semi-automatic circular saws range

If you don’t see a machine that does the job please send us your requirements or try using the saw finder.

23 sawing machines have been found...

SORT BY:
 
 
Bomar AL 400

Bomar AL 400

Semi-automatic heavy duty saw for aluminium, plastics and non ferrous materials

  • Heavy duty construction with powerful motor
  • Quiet, vibration-free cutting
  • Safe -cutting area totally enclosed
  • Automatic blade feed
  • Secure 4 point clamping

Specification

Manufacturer: Bomar
Max Cut Size: 120mm
Materials: Sections,
Cutting Type:

Bomar AL 500

Bomar AL 500

Semi-automatic heavy duty saw for aluminium, plastics and non ferrous materials

  • Heavy duty construction with powerful motor
  • Quiet, vibration-free cutting
  • Safe: cutting area totally enclosed
  • Automatic blade feed
  • Secure 4 point clamping

Specification

Manufacturer: Bomar
Max Cut Size: 175mm
Materials: Sections,
Cutting Type:

Ileri V315 HX

Ileri V315 HX

The Illeri V315HX is a heavy duty semi-automatic circular saw designed for fast cutting.

  • Hight production rates, ideal for short batch runs
  • Heavy duty gearbox
  • Mitre left and right
  • Centralising heavy duty split vice
  • Cuts all material types

Specification

Manufacturer: Ileri Teknik
Max Cut Size: 110mm
Materials: Sections,
Cutting Type:

Bomar AL 600

Bomar AL 600

Semi-automatic heavy duty saw for aluminium, plastics and non ferrous materials

  • Heavy duty construction with powerful motor
  • Quiet, vibration-free cutting
  • Safe: cutting area totally enclosed
  • Automatic blade feed
  • Secure 4 point clamping

Specification

Manufacturer: Bomar
Max Cut Size: 200mm
Materials: Sections,
Cutting Type:

Metlsaw CS Series Extrusion Saw

Metlsaw CS Series Extrusion Saw

Known industry-wide by all extrusion companies as the highest production, highest precision cut to length saw available. With many options customizable to this saw, the Metlsaw CS extrusion saw delivers decades of precision sawing with simple and easy maintenance. It can deliver cut to length tolerances of +/- 0.075mm

The CS range of extrusion saws for non-ferrous material can saw aluminium, copper, brass and plastics to very tight tolerances.  It is the cut off saw of choice at metal service centres worldwide.

  • Fully automatic sawing system
  • Up to 355mm thickness cutting capacity
  • Eliminates/Reduces secondary machining of parts
  • Material Handling options for loading and unloading
  • Cuts Extrusions, Tubes or Rounds
  • Precision positioning tolerances to +/- 0.075mm
  • 30 HP Arbor With Variable Motor
  • Universal Clamping for single or stack cutting
  • Touch screen operator interface
  • Controls by Rockwell Automation (AB)
  • Easy blade change
  • Backguage lengths from 3.6 Metre to 24 Metre

Specification

Manufacturer: Metlsaw
Max Cut Size: 1500mm
Materials: Sections,
Cutting Type:

More Info

Machine Details

Metlsaw REM Saw

Metlsaw REM Saw

This saw allows for sawing of small non-ferrous plate, bars and extrusions. With a cutting window of 1.2M or 1.5M width, and capacity for stock lengths up to 1.5M , this is an easy to use saw for quick precision sawing of remnants, short bars or extrusions.

The saw employ a high torque, low RPM circular blade which yields precision cuts with very little maintenance.  

  • Fully automatic sawing system
  • Designed for fast. easy sawing of remnant plate.
  • Precision positioning tolerance to +/- 0.13mm
  • 20HP Arbor Motor
  • Touch screen operator interface
  • Easy blade change
  • Controls by Rockwell Automation
  • Cuts up to 150mm thick non-ferrous plate

Specification

Manufacturer: Metlsaw
Max Cut Size: 1500mm
Materials: Sections,
Cutting Type:

More Info

Machine Details

ExactCut TAC 75

ExactCut TAC 75

High Performance circular saw for precision cutting of solids and tubes.

Specification

Manufacturer: ExactCut
Max Cut Size: 75mm
Materials: Sections, Solid,
Cutting Type:

More Info

Machine Details

Metlsaw S Series Ferrous Platesaw

Metlsaw S Series Ferrous Platesaw

The Metlsaw ferrous plate saw is the saw of choice for high speed, precision sawing of steel plate up to 150mm thick. The saw can cut carbon steel, tool steel or stainless to +/- 0.2mm

  • Fully automatic sawing system
  • Up to 150mm thick material
  • Cuts all types of Ferrous Metals
  • Flood Coolant
  • 50 HP Arbor with Variable Motor
  • Precision Tolerances to +/-0.007"
  • Surfaces Finishes to 16 Micro-inch
  • Hydraulic Clamping on both sides of cut
  • Eliminate subsequent machine of cut parts
  • Fast set up and part number memory
  • Rapid sawing speeds
  • Full size touch screen operato interface
  • PLC Controls by Rockwell Automation (A/B)
  • Easy Blade Change

Specification

Manufacturer: Metlsaw
Max Cut Size: 3650mm
Materials: Solid,
Cutting Type:

More Info

Machine Details

Ileri LCS 350

Ileri LCS 350

Semi-Automatic Vertical Action Circular Saw

  • Foot switch actuation
  • Hydro-pneumatic operation of saw head smoothes descent for optimum cut
  • Heavy duty, helical gear gearbox
  • Head descends on hardened linear guides
  • Back lash reduction for prolonged blade life
  • Easy, positive 0-45° right and 60° deg mitre left 

 

Specification

Manufacturer: Ileri Teknik
Materials: Sections, Solid,
Cutting Type:

More Info

Machine Details

OMP 370S

OMP 370S

Heavy duty, semi automatic, vertical action saw for fast cutting of steel sections and solids.

  • Heavy duty two stage gearbox with vertical action for fast accurate cutting of steel solids and sections.
  • Manually set mitre cutting 45° left and right.
  • Vice can be positioned either side of blade (option for 2nd vice)
  • Infinitely variable hydraulic control of saw head descent speed
  • High speed non ferrous version available

Specification

Manufacturer: OMP
Max Cut Size: 130mm
Materials: Sections, Solid,
Cutting Type:

OMP 370 SD

OMP 370 SD

Touch & Cut, semi-automatic, circular saw for fast cutting of steel sections and solids.

  • Heavy duty two stage gearbox with vertical action for fast accurate cutting of solids and sections.
  • Manually set mitre cutting 45° left and right.
  • Powered split vice to clamp material on both sides of blade (90°).
  • Infinitely variable hydraulic control of saw head descent speed.
  • High speed non ferrous version available.

 

Specification

Manufacturer: OMP
Max Cut Size: 130mm
Materials: Sections, Solid,
Cutting Type:

Altech Kappa M-RV-600

Altech Kappa M-RV-600

Cutting off Machine with automatic raising blade

  • Manual pivoting inwards/outwards 22.5°/-90°/-140° with digital angle display
  • Pneumatic tilting of the blade 90°/-45°
  • Single head upstroke mitre saw for compound cuts
  • TCT saw blade 600mm Ø; automatic raising/closing of the safety hood
  • Motor 3kW; 2 x vertical pneumatic clamps
  • Spray mist lubrication

Optional equipment

TCT saw blade 600mm; horizontal pneumatic clamps; micro-drop lubrication; 4kW motor; emulsified cutting oil 20ltr

Specification

Manufacturer: Altech
Max Cut Size: 150mm
Materials: Sections,
Cutting Type:

23 Machines – Page 1 of 2
Last Next