search using our
SAW FINDER
Prosaw Ltd - bandsaws, Circular Saws, Geka Steelworkers, Machining Centres

Akyapak 3ADM 1200 CNC

Drilling - Marking - Cutting Line

Akyapak 3ADM 1200 CNC Drilling - Marking - Cutting Line

In 3ADM, in drive way of the profile with the length of 500 mm you can make so many drills without any drive of the profile which means the profile stays idle. For example, if the holes 10 mm and the distances between the holes are 40mm, you are able to drill 12 holes without any drive of the profile. And that means very big timesaving. Also there is one more advantage of 3ADM system which makes you eligible to make scribing marking on 3 surfaces.

With there separate independent spindle units, the profile can be drilled from three sides. There are four tool changing systems with four-toolings capacity for each spindle.

Firstly, material to drill (profile, box profile, angle) is placed on infeed conveyor. The workpiece, which is hold with handle claw of drive machine, is driven into the drillingmachine and the position of the piece is set to zero by laser light.

Drilled workpiece, (if available) is driven to the angled bandsaw with handle claw of drive machine.* Sawing can be done in desired lenght and angle (-44/+60). Sawedrolls of material are driven to the output conveyor.

*To enable easy rotation of the body while the material is in the bandsaw, it is lifted 10mm by hydraulic platforms located in the entry and output of the saw.

3ADM 1200 CNC Drilling - Marking - Cutting Line

3ADM 1200 CNC Drilling - Marking - Cutting Line

Model: 3ADM 1200 CNC

Contact Us


Call us during office hours (8:30am – 5pm, Mon – Fri) for assistance with choosing the best machine for the job.


Fill in the form below, and we'll get back to you as soon as possible.