Prosaw Limited - the people to see for saws
Call Prosaw 01536 410999

Geka Bendicrop 60S

A steelworker machine from Geka

Bendicrop 60S

Two Cylinder Steelworker
Permanent banding station
Anti-distortion system

The Geka Bendicrop 60S is a twin cylinder 60 tonne punching steelworker machine with 6 workstations. This hydraulic steelworker is fitted with a bending station and system to avoid distortions when cutting plates.

Geka Bendicrop 60S Standard Details

Geka's exclusive BENDICROP 60S steelworker is a dual cylinder machine with 6 workstations:

  • Punching station
  • Flat bars shearing
  • Plate shear
  • Bending station
  • Triangular notching station
  • Round and square bars shearing station

Geka Bendicrop 60S Technical Details

The Bendicrop 60S steelworker machine has TWO BIG ADVANTAGES over the other machines:

  • Permanent bending station with a capacity of up to 200mm x 15mm inside CE regulation 
  • Shearing system with minimum distortion of flats 


  • Accessories mounted on the machine as standard included on basic price:
  • Standard punching attachment: Punch holder; Punch clamp sleeve; Quick change nut; Punching stripper; Table for punch; Set of punches and dies.
  • Hydraulic hold-down, movable and fixed blades for cutting angles, round and square bars 
  • Top and bottom blade for cutting flat bars, with the anti-distortion system. This station is provided with a guided table for flats to guide the material from 45º to 90º 
  • Triangular notching equipment with the notching rectified table provided with a scaled rule 
  • Bending equipment with two dies (V of 50 and 90mm)
  • Two different speeds to cover the CE regulation with the bending station
  • Universal electric automatic bar stop 1m
  • Set of tooling for the maintenance of the machine
  • Instructions manual in the customer’s language
  • CE certified

Geka Bendicrop 60S Optional Features

500mm throat SD model

Geka Bendicrop 60S Specifications

Manufacturer Geka
Machine Type Steelworkers / Two Cylinder Steelworker
Operation Type
Material Type
Flat Bar Shear 350 x 10mm
Punching 40 x 11 mm
Angle Shear at 90 120 x 120 x10mm
Bending 150 x 10mm
Throat Depth 250mm

Contact Us

Call us during office hours (8:30am – 5pm, Mon – Fri) for assistance with choosing the best machine for the job.

Please note: All the information about machines listed on this website is subject to change and should not be relied upon without verification from our sales staff.

Make An Enquiry

Complete the form below with your enquiry.