Get
in touch
Get in touch
×

protected by reCAPTCHA

GEKA Gamma Roller 150 and 160

Machine Subcategory

Automatic Lines

Overview

The GEKA Gamma Roller 150 and 160 product lines are a complete automatic solution for punching, marking (standard on ALPS 160) and shearing of angles for medium and large sized steel profiles.

Detailed Description

The Gamma Roller (DPS/ALPS) product line is a complete automatic solution for punching, marking and shearing of angles for medium and large sized steel profiles. It's ergonomic design, all-purpose functionality and proven performance enable a greater range of operations and produce a wider variety of pieces. The DPS/ALPS product line is low cost but delivers high quality and gives you the flexibility to process flat bar and U profiles as well.

Standard Specification

  • Minimum angle 35x35x4mm
  • Maximum angle 150x150x15mm or 160x160x16mm
  • Minimum Flat Bar 50x5mm
  • Maximum Flar Bar 150x15mm or 160x16mm
  • Minimum channel 60x30mm
  • Maximum channel 120x60mm
  • Marking Cassette Characters 5x10 size typeface
  • No of Punches 6 (3/wing)
  • Maximum Diameter 31mm
  • Punching Force 730 kn
  • Shear station tonnage 1900 kn or 2500 kn
  • Feeder Speed Programmable up to 36 m/min

Optional Features

  • Automatic side loader
  • Software line PRO
  • Automatic unloading system
  • Automatic waste system
  • Marking System (standard on ALPS 160)

Get in touch +44 (0)1536 410999

protected by reCAPTCHA

GEKA Gamma Roller 150 and 160 Technical Specifications

Manufacturer GEKA
Machine Type Steel Worker
Punching Double Punch DPS 150 - 31 through 15mm, Triple Punch ALPS 160 - 31 through 16mm
Steel Angle Shear 90 150x150x15mm (DPS 150), 160x160x16mm (ALPS 160)
Steel Angle Shear Tonnage 190 tonnes (DPS 150), 250 tonnes (ALPS 160)
Punching Power 60 tonnes (DPS 150), 73 tonnes (ALPS 160)

Make an Enquiry

protected by reCAPTCHA